RADWAG MA 5Y Moisture Analyzers

Product Overview

The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step

The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.

Key Features

• The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
• You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
• The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.
• The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning.
• The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C.
• The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined.
• Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end.

Available Models and Specifications

Specifications vary by model. The following values are taken from the supplied product data; confirm the selected configuration before ordering.

Ordering Information

Contact GZG Balance to confirm the required model, configuration, availability and quotation.